Weft Hair Extensions

What Are Weft Hair Extensions?

Weft hair extensions are strands of human hair sewn or hand-knotted onto a fabric or thread strip, forming a continuous track for professional salon installation. In the wholesale context, a weft refers to the pre-made track itself, not the application service.

Weft tracks attach to natural hair through sew-in (stitched onto braided cornrow foundations), micro-bead systems (secured with silicone-lined rings), or adhesive tape backing depending on weft construction. Each weft type in the APOHAIR range supports specific installation methods, detailed in the product sections below.

APOHAIR’s weft hair extensions are available in Virgin and Remy grades, across straight, wavy, curly, kinky, and afro textures, in lengths from 6″ to 32″ (15cm–81cm) depending on weft type.

8 Types of Weft Hair Extensions APOHAIR Supplies

APOHAIR supplies eight weft constructions, each built for a distinct client hair profile and installation method.

Machine Weft Hair Extensions

Machine weft tracks run 1.4m–1.6m (55″–63″) per strip depending on hair length, with a weft line of approximately 5mm. Each 100g pack contains one strip. The machine-sewn construction produces sealed edges that stop shedding, making this the most durable and cost-accessible weft type in the range.

Available lengths run from 6″ to 32″ (15cm–81cm). This track installs via sew-in, micro-bead, or clip-in methods. With sulfate-free maintenance, a set holds through 6–12 months of wear on medium-to-thick hair.

Genius Weft Hair Extensions

Genius weft tracks measure 75–80cm (29″–31″) per strip with a weft line of only 1.5–2mm. Each 100g pack contains 2–3 strips. The construction uses machine-sewn transparent tape binding at the seam, making the track cuttable at any point without fraying or releasing strands. Stylists fit each row to the exact parting width without wasting material.

Available lengths run from 16″ to 28″ (40cm–71cm). Installation runs via sew-in with silicone beads. This track works well on fine-to-medium hair and holds through 3–5 reinstall cycles with correct care. The 1.5–2mm weft line stays close to the scalp and remains undetectable even with hair worn up.

Flat Weft Hair Extensions

Flat weft strips measure 80cm (31″) wide with weft line options of 4mm, 8mm, or 3mm depending on specification. Each 100g pack contains 2 strips. Made by hand, each strip carries sealed edges that prevent shedding. The track lies completely flat against the scalp, removing the raised ridge that machine wefts produce.

Flat wefts attach via sew-in, micro-bead, or adhesive methods and suit fine-to-medium hair density. Clients who keep hair up regularly find flat wefts more comfortable than thicker machine-sewn tracks over long wear periods.

Double Layer Silky Flat Weft Hair Extensions

Double Layer Silky Flat Weft tracks are hand-made with a weft width of 1m–1.7m (39″–67″) and carry sealed edges throughout. Two layers of silk wrap the weft edge at the seam. The double silk wrapping cushions the track edge against the scalp, cutting direct contact between the sewn foundation and the skin.

This construction suits clients with sensitive scalps who need long-term wear comfort across multiple reinstall cycles. Installation runs via sew-in, micro-bead, or adhesive methods. The two-layer silk wrapping also reinforces the weft edge, extending the track’s life through repeated moves.

Single Layer Silky Flat Weft Hair Extensions

Single Layer Silky Flat Weft tracks are hand-made with a weft width of 1.2m–2.5m (47″–98″) and carry sealed edges. One silk layer wraps the weft edge rather than two. The result is the lightest silky flat option in the range, noticeably lighter than the double-layer version, while still protecting sensitive scalps from direct weft contact. Installation runs via sew-in or micro-bead methods.

This track suits fine hair where minimal weight at the root matters most, particularly for clients who wear extensions through full working days.

Feather Weft Hair Extensions

Feather weft tracks come in 100g packs divided into 2 rings of 50g each, with the ring weight counted separately from the 100g hair weight. Available lengths run from 16″ to 28″ (40cm–71cm). The track uses a sparse weaving technique that reduces strand density along the row, producing an ultra-light construction with minimal root tension. Attachment runs via micro-bead or sew-in methods.

Feather wefts suit clients with very fine, fragile, or chemically processed hair where heavier tracks pull at the follicle. The open weave sits naturally against existing hair and adds subtle volume without visible bulk.

Hand-tied Weft Hair Extensions

Hand-tied weft tracks are produced by knotting individual strands onto a fine thread foundation by hand. Each strip measures 11 inches (28cm) wide with a weft line of 1–1.5mm. Each 100g pack contains 5–7 strips, all carrying sealed edges to stop shedding. The knotted construction spreads weight evenly across the attachment row, reducing root tension compared to machine-sewn tracks. Installation runs by sewing the track directly onto a bead or cornrow foundation with silicone beads for hold.

Hand-tied weft tracks cannot be cut — severing the thread releases the knotted strands. This construction suits fine or weak hair where long-term comfort and natural movement take priority.

Nano Hand-tied Weft Hair Extensions

Nano Hand-tied weft tracks are hand-made with a finer thread foundation than standard hand-tied, producing a thinner weft line with sealed edges. Each strip measures 11 inches (28cm) wide. Each 100g pack contains 6–11 strips, the highest strip count per pack in the range. Installation follows standard sew-in technique. The sub-1mm weft line sits virtually flush against the scalp once natural hair falls over the track.

Like standard hand-tied, these strips cannot be cut. This construction suits clients with very fine or fragile hair who need the most natural-looking result with the lowest possible weft visibility at the row.

Why Salons and Distributors Choose APOHAIR Weft Extensions?

APOHAIR sources 100% Vietnamese human hair directly from donor collectors, with no third-party processing in the chain and no batch inconsistency as a result.

100% Vietnamese Human Hair — Cuticle-Intact, Single-Donor Regions

All APOHAIR weft hair comes from Vietnamese donors, processed without stripping the cuticle layer. The cuticles stay intact and run in one direction, so the hair does not tangle against itself during wear. No silicone coating masks texture inconsistency between batches. Every bundle goes through weight verification, cuticle direction inspection, and weft line strength checking before it leaves the factory.

Hair is available in Single Drawn, Double Drawn, and Super Double Drawn standards, giving distributors and salon buyers the density control their client base requires.

Factory-Direct Pricing — 33,000 sq m Facility, 1,000+ Craftspeople

APOHAIR owns and operates a 33,000 sq m (355,000 sq ft) production facility in Nam Dinh, Vietnam with 1,000+ craftspeople. Monthly output exceeds 20 metric tons of weft extensions across all eight constructions. Buying factory-direct removes the distributor tier from the pricing chain, and wholesale partners pay 20–30% less than comparable international suppliers charge.

APO’s Factory has operated since the mid-1990s and currently ships hair extensions and wigs to 50+ countries, including the US, UK, Brazil, Mexico, Nigeria, Canada, Australia, and Africa.

Weft Extension Comparison: Which Type Fits Which Client?

The right weft construction depends on three factors: The client’s hair density, the salon’s preferred installation method, and the acceptable weft line visibility at the scalp.

Wholesale Pricing and Order Structure At APOHAIR

APOHAIR pricing is factory-direct with tiered MOQ, with no reseller markup in the chain. Orders start at 200g per weft type. Mix textures, colors, and lengths within a single order, with total order weight counting toward the MOQ threshold rather than per individual SKU.

Send An Inquiry To Get Free Sample

How Do You Source, Customize, and Reorder Weft Extensions from APOHAIR?

Sourcing weft extensions from APOHAIR follows four steps:

1. Contact the sales team via WhatsApp or send an inquiry on this page. Include your weft type, hair length, texture, color reference, draw standard, target quantity, and delivery country.
2. Receive a tailored price list within one business day based on the specs you submitted.
3. Request a sample to check weft line quality, hair texture, and color match before committing to a bulk order. Sample availability and whether the sample ships free depends on your intended order size, so confirm eligibility with the sales team at this stage.
4. Place your bulk order once specs are confirmed. In-stock weft types ship within 1–2 business days. Custom and colored orders require additional production time, so confirm the exact lead time with the sales team at the order stage. Reorders for confirmed SKUs follow the same in-stock timeline.

Custom Options For Your Business: Color Matching, Private Label, and Bulk Packaging

APOHAIR supports full customization for salon brands and distributors building their own product lines.

Color matching runs against a physical color ring, client reference photo, or Pantone specification. Private label packaging covers branded boxes, hang tags, logo stickers, ribbon, and insert cards, with minimum quantities applying per product type. Plain wholesale packs ship for buyers who prefer unbranded inventory.

Custom and colored orders carry additional production time beyond in-stock lead times, so confirm the exact schedule with the sales team before placing your order.

APOHAIR ETHICAL & PREMIUM HUMAN HAIR EXTENSIONS MANUFACTURER

• Address: Building 3A, Lane 82 Duy Tan, Cau Giay, Hanoi, Vietnam
• Factory: Yen Luong Village, Y Yen District, Nam Dinh Province, Vietnam
• WhatsApp: +84 862 132 366
• Email: wholesale@apohair.com
• Website: https://apohair.com/