24 Best Short Hairstyles for Women With a Diamond Face Shape: Chin-Length Bobs, Textured Lobs, Shags & Pixies
The best short hairstyles for women with a diamond face shape are the chin-length bob, the textured lob, and the A-line bob. A diamond face is widest at the cheekbones and narrowest at both the forehead and the jaw. A shortcut earns its place by adding width to those two narrow zones. The cut family and the point where the perimeter stops decide how well it does that.
Four decisions then narrow the choice: the cut family, the fringe, where the perimeter sits against the jaw, and the hair’s texture and density. Shortcuts fail on a diamond face when they slick everything back, end right at the cheekbone, or, in a bob or lob, add crown height.
Diamond faces have high, prominent cheekbones, a narrow forehead, and a chin that often comes to a point. Stylists soften the shape by filling in above and below the cheekbones rather than at them.
Twenty-four short cuts follow that approach for women, from chin-length bobs and textured lobs to shags, fringes, and four pixie styles.
Best Short Hairstyles for Women With a Diamond Face Shape
The chin-length bob, the textured lob, and the A-line bob suit a diamond face best, each adding width at the jaw while leaving the cheekbones unframed. The other twenty-one widen the forehead with a fringe, build fullness at the jaw, or soften the outline with texture.
1. Chin-Length Bob
A chin-length bob ends level with the chin, with soft, slightly textured ends. On a diamond face, that line adds fullness around the narrow chin and jaw, which pulls the eye below the cheekbones and evens out the width. It is the most dependable shortcut for this face shape, because it works on the narrowest zone directly.
Light point-cutting at the ends allows them to kick slightly outward, widening the jaw. The line stays level because on a chin-length bob, a steep rise at the back lifts its weight toward the cheekbones. For women with straight to wavy hair, Type 1B to 2B, suits it, and fine hair gains body from the chin-level weight. A recut every 6 to 8 weeks keeps the line at the chin.
Why it works: The chin-level line fills out the chin and jaw, which is exactly what women with a diamond face need to even out the width below the cheekbones.
2. Textured Lob
A textured lob falls to the collarbone and breaks its length with soft, piecey texture from the jaw down. On a diamond face, that texture creates movement and width at the jaw level, while the length keeps the look relaxed. The layers begin below the cheekbones, so the widest part of the face stays clear.
Point-cutting and a razor create the texture, and a texture spray brings it out on straight hair. The crown stays free of texture, so the top lies smooth. For women, wavy hair, Type 2A to 2C, shows the movement best. It grows out easily and needs a trim every 8 to 10 weeks.
Why it works: Piecey texture from the jaw down brings movement and width right where a diamond face narrows, and layers that begin below the cheekbones leave the widest part of the face alone.
3. A-Line (Angled) Bob
An A-line bob stays short behind and grows longer at the front, where the ends finish an inch or two past the chin. On a diamond face, the longer front pieces hang beside the narrow jaw and chin, adding width there, and the soft angle leads the eye down from the cheekbones. The short back keeps the crown flat.
A gentle angle of about 1.5 inches keeps the front pieces soft around the jaw, while a steeper drop narrows the lower face again. Point-cutting softens the front corners so they curve toward the jaw. Straight and slightly wavy hair shows the angle cleanly. A recut every 6 to 8 weeks keeps the front at the right length.
Why it works: Longer front pieces hang beside the jaw and chin, the two zones a diamond face needs filled in, while the soft angle leads the eye down and away from the cheekbones.
4. Shaggy Crop or Wolf Cut
A shaggy crop or wolf cut layers the hair short and choppy, with light texture on top and wispy ends that reach the jaw. On a diamond face, the wispy ends put softness and width at the narrow jaw, and the choppy layers blur the outline around the cheekbones. The top keeps its texture without building height.
The top layers stay light and long enough to lie down, since short, stacked crown layers push up unwanted height. The ends thin out toward the jaw, so they separate and flick. Wavy hair gives the shag its best texture on most women, and a texture spray does the job on straight hair. A reshape every 8 weeks keeps the ends wispy.
Why it works: Wispy ends bring softness and width right to the jaw, the zone a diamond face is missing it most, while choppy layers blur the outline around the cheekbones instead of framing them, a low-effort look many women reach for.
5. Textured Bob
A textured bob sits between the chin and the jaw and uses piecey, broken ends instead of a solid line. On a diamond face, the broken ends spread out at the jaw, adding width where the face narrows, while the top stays smooth. The texture also keeps the bob from framing the cheekbones with a hard edge.
Texture comes from point-cutting into the ends and a little through the mid-lengths, never at the crown. A texture paste separates the pieces on straight hair. For women, medium to thick density shows the texture best, and fine hair works with lighter texturing. A recut every 6 to 8 weeks keeps the ends piecey.
Why it works: Broken, piecey ends spread out right at the jaw, filling in the narrowest part of a diamond face, and the smooth top keeps the cheekbones from getting a hard frame around them.
6. Layered Bob
A layered bob for a diamond face keeps its layers below the cheekbones, with the shortest one landing around the mouth. The movement then gathers at the narrow lower face instead of adding volume at the widest point. On a diamond face, that placement is the difference between softening the cheekbones and widening them.
Any layer that begins at cheekbone height stacks volume exactly where the face is already widest. The top layer stays long and smooth over the crown. Medium to thick hair makes the layering visible, and fine hair keeps the layers few and long. The layers need a refresh every 8 weeks.
Why it works: Keeping the layers below the cheekbones puts all the movement at the narrow lower face instead of the widest point, and that placement is what separates a flattering diamond-face bob from one that backfires.
7. Flipped-Out Bob
A flipped-out bob turns its ends up and away from the face at the jaw, giving a playful, retro kick. On a diamond face, that outward flip adds width right at the jawline, the narrow zone below the cheekbones, which balances the face from below. The flip works like a small ledge of volume where the face tapers.
The bob ends at the jaw, and a round brush or flat iron rolls the last inch outward. A blunt perimeter gives the flip more weight and helps it hold. Straight, medium-density hair holds the flip longest, and on fine hair, a light-hold spray keeps humidity from relaxing it. A trim every 6 weeks keeps the flip at jaw level.
Why it works: That outward flip works like a small ledge of volume right where a diamond face tapers in, adding width at the jawline instead of leaving it to narrow on its own.
8. C-Shaped Rounded Bob
A C-shaped bob shapes its sides into a gentle arc that swells just below the cheekbones and tucks in at the jaw. On a diamond face, the fullest part of that arc sits over the hollow between cheekbone and jaw. It fills the narrow lower face without adding width at the cheekbones. A pointed chin also looks less sharp inside the curve.
The widest point of the C belongs below the cheekbone, since a curve that bulges at cheekbone level widens the face where it is already broadest. Ends cut a fraction shorter underneath let the bottom tuck toward the jaw. Straight and loosely wavy hair holds the arc. It needs recutting every 6 to 8 weeks, once the tuck drops below the jaw.
Why it works: The fullest part of the arc sits below the cheekbones, so a diamond face gets the fill it needs at the jaw without any extra width landing on its widest point, and a pointed chin looks softer tucked inside the curve, which female clients often notice first.
9. Graduated Bob
A graduated bob builds a rounded mass behind the ears and sweeps it around to a front that ends at the jaw. On a diamond face, the weight line has to land at jaw level, where the face narrows. The same shelf set higher sits beside the cheekbones and widens them. Kept low, the graduation gives the lower face a fuller, rounder base.
Elevation stays low, so the weight line forms near the nape and runs forward along the jaw. On fine hair, the graduation reads as extra density for women who want more body, and dense hair calls for some thinning at the nape first. A recut every 6 weeks holds the shelf at jaw level.
Why it works: Keeping the graduation low gives the lower face a fuller, rounder base right at jaw level, which is where a diamond face needs the extra body most.
10. Jaw-Length Bob
A jaw-length bob stops along the jawline, a touch shorter than a chin-length cut and well below the cheekbones. On a diamond face, the jaw is one of the two narrow zones, and a line placed along it builds width precisely there. The eye reads the bob’s fullness at the jaw, and the cheekbones stop looking like the widest point.
A little texture at the ends lets them flick slightly outward, which pushes the fullness sideways at the jaw. The line clears the cheekbones by a good margin, since a shorter version that ends near cheekbone level widens the face instead. Medium-density hair gives the edge its fullness, and fine hair looks best with blunt ends and texture only at the tips. The ends drift past the jaw after about 6 to 8 weeks and need trimming back.
Why it works: A line placed right along the jaw builds width at one of the two zones a diamond face is short on, so the eye lands on a full jaw instead of jumping straight to the cheekbones.
11. Collarbone Lob With Face-Framing Layers
A collarbone lob with face-framing layers pairs a lob that reaches the collarbone with front layers that start at the chin. On a diamond face, the framing starts below the cheekbones, so the layers add softness and width around the jaw and chin rather than at the widest point. The length behind them keeps the look easy to wear.
Framing begins at the chin and steps down toward the collarbone. Framing that begins at the cheekbone adds width right at the widest point, which is exactly what a diamond face does not need. Wavy hair gives the framing layers a natural bend toward the jaw, a detail many female clients request. The framing needs a trim every 8 weeks, and the length every 10 to 12 weeks.
Why it works: Starting the framing at the chin, not the cheekbone, puts the softness and width around the jaw, the part of a diamond face that actually needs it, and the length behind it keeps the cut easy for women to wear day to day.
12. Bob With Curtain Bangs
A bob with curtain bangs sweeps a split fringe out toward the temples, where a diamond face is narrow, with a jaw-length bob underneath. On a diamond face, each curve pushes a little hair outward at the temples, which widens the forehead and brings it closer to the width of the cheekbones. The bob beneath adds the same balance at the jaw.
The fringe ends above the cheekbone rather than on it, since curtains that finish at the cheekbone add bulk at the widest point. Blow-drying each side up and out with a round brush gives the curve its lift at the temples. Fine and medium hair lifts easily at the roots. The curtains need a trim every 5 to 6 weeks to stay above the cheekbone.
Why it works: Each curve pushes a little hair outward at the temples, closing the gap between a narrow forehead and wide cheekbones, and the jaw-length bob underneath does the same job lower down.
13. Bob With Wispy Fringe
A bob with a wispy fringe spreads a fine, see-through fringe from temple to temple on top of a chin-length bob. On a diamond face, a fringe that runs the full width of the forehead makes the narrow top read wider without the weight of a blunt fringe. Because it is sheer, the forehead widens visually while the look stays light.
The fringe section runs wide, from temple to temple, but stays shallow, so it adds width without borrowing much hair. Point-cutting keeps every strand fine at the tip. It works best on fine to medium hair. The fringe needs thinning every 4 weeks as it fills in.
Why it works: A sheer fringe running temple to temple makes a narrow forehead read wider without the weight of a blunt one, and it is one of the easiest fixes ladies with a diamond face can make to the top half of the face.
14. Bob With Side-Swept Bangs
A bob with side-swept bangs sends a long fringe from a side part across to the opposite temple, over a bob that stops at the jaw. On a diamond face, the fringe spreads hair across the narrow forehead and then drops past one cheekbone at an angle, which softens that cheekbone’s edge. The jaw-length bob adds width below.
The deeper the part, the more of the forehead the fringe covers and widens. Its longest point reaches past the cheekbone, so the diagonal crosses it. Wavy hair needs a smoothing brush to keep the sweep flat. A trim at roughly 5 weeks keeps the tip just past the cheekbone.
Why it works: The fringe spreads across the forehead and drops past one cheekbone on its way down, softening that edge, and the jaw-length bob underneath fills in the other zone a diamond face needs.
15. Side-Parted Bob With Temple Volume
A side-parted bob with temple volume lifts the hair at the temples on both sides of a deep part, over a bob that ends at the jaw. On a diamond face, that lift at the temples widens the narrow forehead, bringing the top of the face closer to the width of the cheekbones. The jaw-length perimeter does the same at the bottom, so the cheekbones stop standing out on their own.
Volume comes from root lift at the temples with a round brush, not from height at the crown. The crown stays smooth, since lifting its lengthens the face and draws the eye away from the jaw. A volumizing spray at the roots helps fine hair hold the lift. A trim every 6 to 8 weeks keeps the perimeter at the jaw.
Why it works: Root lift at the temples closes the gap between a narrow forehead and the cheekbones, and pairing it with a jaw-length perimeter balances a diamond face at both ends instead of just one.
16. French Bob
A French bob pairs a short, jaw-grazing line with a fringe, so it works on both narrow zones of a diamond face at once. On a diamond face, the fringe fills out the narrow forehead and the jaw-level ends fill out the narrow lower face, leaving the cheekbones between two wider lines. Cut higher, near the earlobe, the line lands too close to the cheekbones.
The fringe falls softly to the brows, cut wispy rather than blunt, and spreads slightly toward the temples. Air-drying with a little texture cream gives the undone finish, a routine most women already use. Wavy hair suits the relaxed shape, and straight hair needs a light bend at the ends. Fringe and line both need a trim every 5 to 6 weeks.
Why it works: Having a fringe at the top and a jaw-level line at the bottom covers both zones a diamond face is short on, so the cheekbones end up sitting between two wider lines instead of standing alone.
17. Italian Bob
An Italian bob is a generous, chin-length bob whose fullness spreads sideways at the jaw rather than rising on top. On a diamond face, that sideways fullness lands at the narrow jaw, so the lower face widens to meet the cheekbones. The top stays smooth, which keeps the added width low.
The waves begin below the cheekbone and grow fuller toward the ends, so the volume builds from the jaw down. A heavy, level edge supports the fullness. Thick or wavy hair supplies the body naturally for most women, and fine hair needs rollers to come close. A recut about every 7 weeks keeps the edge full.
Why it works: This fullness spreads sideways at the jaw instead of rising on top, so a diamond face’s lower half widens to meet the cheekbones while the crown stays smooth and low, a shape most women find easy to keep up.
18. Short Shag With Cheekbone Layers
A short shag with cheekbone layers cuts soft, feathered layers that fall over the cheekbones rather than stopping on them, with wispy ends near the jaw. On a diamond face, those layers drape across the widest point and blur its edge, and the wispy ends add a little width lower down. The result softens prominent cheekbones instead of framing them.
The layers begin above the cheekbone and end below it, so no layer finishes at the widest point. Layers that end exactly on the cheekbone build a ledge of volume there. Loose waves build the shag’s texture on their own, and the crown layers stay long to keep the top flat. A reshape every 8 weeks keeps the layers draping.
Why it works: Layers that drape across the cheekbones instead of stopping right on them blur the edge of a diamond face’s widest point, so the cheekbones look softened rather than framed.
19. Textured Pixie With Side Bangs
A textured pixie with side bangs pairs a short, piecey pixie with a longer fringe swept across the forehead. On a diamond face, the swept fringe spreads hair across the narrow forehead and angles down toward one cheekbone. The top of the face reads wider and the cheekbones softer. It is the pixie that suits this face shape most readily.
The fringe needs enough length to cross the forehead and reach the far temple, since a shorter fringe cannot widen the top. The sides stay soft because close, clean sides expose the full width of the cheekbones. Fine to medium hair sweeps most easily for women who want a low-effort style. The fringe needs a trim every 4 to 5 weeks.
Why it works: A swept fringe crosses the forehead and angles down toward one cheekbone, and that single move does double duty on a diamond face: the top reads wider and the cheekbone underneath reads softer for women who want a gentler profile.
20. Side-Swept Pixie
A side-swept pixie combs its entire top in one direction, so the hair lies across the head in a single sweep. On a diamond face, the sweep carries hair out over the narrow forehead toward one temple and widens the top. The asymmetry also pulls attention away from the matched points of the cheekbones. It is the simplest short pixie for this face shape to wear.
The sweep needs the top to stay longer than the sides, since a top cropped as short as the sides has nothing to sweep. The sides stay soft over the ears. Straight and wavy hair both hold the sweep. The shape needs tidying every 5 to 6 weeks.
Why it works: Sweeping the top toward one temple widens the forehead, the part of a diamond face that needs it, and the asymmetry it creates pulls the eye away from the two matching cheekbone points.
21. Layered Pixie
A layered pixie runs soft layers all over a short crop, so every edge of the outline curves instead of ending in a hard line. On a diamond face, those soft edges keep the pixie from framing the cheekbones with a sharp outline. The layers around the temples add a little width to the narrow forehead. It is the softest of the pixie options for a diamond face.
The layers stay longest around the temples and the fringe, where a diamond face gains the most from extra width. Close, flat sides with no layering expose the full span of the cheekbones instead. Fine and medium hair show the layering well on most women. A reshape every 6 weeks keeps the edges soft.
Why it works: Soft, curved edges stop the pixie from tracing a hard line around the cheekbones, and letting the layers run longest at the temples adds a little width right where a diamond face’s forehead falls short.
22. Bixie (Pixie Bob)
A bixie sits on the border between the bob and pixie families, with a short, layered top and sides long enough to reach the jaw. On a diamond face, those jaw-length sides give the narrow lower face the width a true pixie cannot, while the short top keeps the look light. That makes it the bridge between the two families for this face shape.
The sides end right at the jaw with soft, textured tips, since sides that stop at cheekbone level widen the face at its broadest point. The top carries a light texture and only modest lift, since the jaw-length sides already add width below. Wavy hair adds softness to the longer sides, and light texture keeps a fine-haired top from looking sparse. After about 7 weeks, the sides grow past the jaw and need reshaping.
Why it works: Sides that reach the jaw give a diamond face something a true pixie never can: width at the lower face, and the short top keeps the whole thing light instead of heavy.
23. Curly Bob With Piecey Ends
A curly bob with piecey ends shapes natural curls into a bob that ends at the jaw, with the last few inches cut into defined, separate pieces. On a diamond face, the curls spread outward at the jaw as they spring, adding width where the face narrows, while the crown stays closer to the head. The pieced ends keep that width soft rather than bulky.
Shaping dry, curl by curl, puts the fullest point at the jaw rather than the cheekbones. Curls that pile up at cheekbone level widen the face, so the layering keeps them lower. Type 3A to 4A curls suit it, with a curl cream to define the ends. A reshape every 8 to 10 weeks keeps the volume low.
Why it works: As the curls spring up, they spread outward right at the jaw, adding exactly the width a diamond face is missing there, and the pieced ends keep that fullness soft instead of bulky on women with natural curls.
24. Sleek Straight Bob With a Side Part
A sleek straight bob with a side part keeps a smooth, polished finish and ends at the jaw, with the part set off center. On a diamond face, the side part lifts one side at the temple and sends hair across the narrow forehead. The jaw-length ends tuck slightly under to add fullness at the jaw. Sleek means smooth rather than slicked back, since the hair still covers the temples and jaw.
A flat iron smooths the lengths, and a slight bend at the ends keeps them from hanging flat against the jaw. The part sits above the middle of one eyebrow, not dead center, since a center part with flat temples narrows the forehead further. Type 1A to 1C hair holds the finish best. A trim every 6 to 8 weeks keeps the ends at the jaw.
All twenty-four add width where a diamond face narrows, at the forehead, the jaw, or both, and leave the cheekbones unframed. The cut family and the hair itself decide which one suits best.
Why it works: Setting the part off center lifts one side at the temple and sends hair across a narrow forehead, and the jaw-length ends tuck slightly under to add the fullness a diamond face wants at the jaw.
How Should Women Choose a Short Hairstyle for a Diamond Face Shape?
Four decisions choose a short hairstyle for a diamond face shape: the cut family, the fringe, where the perimeter sits against the jaw, and the hair’s texture and density. For women, the face shape sets the goal of widening the forehead and jaw, and these four decide which cut does it best.
Choose by Cut Family: Bob, Lob, Shag or Pixie
Each short cut family widens a diamond face in a different place. Bobs and lobs build width at the jaw through their perimeter, which makes them the most direct choice. Shags soften the cheekbones with layers that drape across them. Pixies have no length at the jaw, so they rely on a fringe and crown shape to balance the face, and the bixie sits between the two families.
Choose by Fringe Type and Forehead Width
A fringe that spreads toward the temples suits a diamond face best, because the forehead is one of its two narrow zones. Curtain, wispy, and side-swept fringes widen the top without weight. A blunt straight-across fringe does the opposite, cutting a heavy bar that makes the upper face read narrower. Without a fringe, a lift at the temples does a similar job.
Choose where the Perimeter Sits Against Your Jaw
On a diamond face, the perimeter works best at the jaw or chin, where it adds width to the narrow lower face. Jaw-length, chin-length, and flipped-out bobs place that width directly, and lobs carry it lower with textured ends. A cut that stops exactly at the cheekbone puts its edge on the widest point and makes it wider.
Choose by Hair Texture and Density
Wavy and curly hair add width at the ends naturally, which suits a diamond face as long as the fullness stays below the cheekbones. Straight hair relies on texture, a flip, or a bend at the ends to create the same width. Fine hair looks fullest in chin-length and jaw-length bobs with blunt edges and light texture at the tips. Where fine ends look thin at the jaw, a few texture-matched clip-in wefts add the fullness a bob depends on.
Which Short Hairstyles Should Women Avoid With a Diamond Face Shape?
The short hairstyles to avoid on a diamond face shape are the ones that add bulk at the cheekbones, lift the crown of a bob or lob, or strip width from the forehead and jaw. Each one widens the face’s broadest point or narrows its narrowest ones:
- Super-high crown volume. On a bob or lob, height at the crown lengthens the face and pulls attention away from the jaw, where short hair should be adding width.
- Ultra-slicked styles. Slicking the hair flat against the head exposes the full angle of the cheekbones and the narrowness of the forehead and jaw at once.
- A cut was made exactly at the cheekbone. A hard, horizontal edge at cheekbone level sits on the widest point of the face and makes it look wider still.
- Blunt straight-across bangs. A heavy, solid fringe cuts across an already narrow forehead and makes the top of the face read narrower.
- A center part with flat temples. Two flat panels from a center part hug the temples and show how narrow the forehead is next to the cheekbones.
- A one-length bob with no texture at the ends. Ends that hang straight and heavy add no width at the jaw, which leaves the cheekbones as the only wide point.
Frequently Asked Questions
Does Short Hair Suit a Diamond Face Shape?
Short hair suits a diamond face shape well when it adds width at the forehead and jaw and leaves the cheekbones unframed. Chin-length bobs, textured lobs, and A-line bobs do this best, especially with a soft fringe. The short cuts that fail stop exactly at the cheekbone, add crown height on a bob, or slick everything back.
Is a Bob or a Pixie Better for a Diamond Face Shape?
A bob is usually the easier choice for a diamond face shape, since its perimeter adds width right at the narrow jaw. A pixie can also suit a diamond face, but with no length at the jaw it depends on a fringe and a well-shaped crown to balance the cheekbones. The bixie sits between the two.
Does a Pixie Cut Suit a Diamond Face Shape?
A pixie cut suits a diamond face shape when it keeps soft sides, some lift at the crown, and a fringe that widens the forehead. Because a pixie has no length at the jaw, those three do the balancing that a bob’s perimeter would otherwise do. A textured pixie with side bangs, a side-swept pixie, or a layered pixie keeps that balance.
What Bangs Suit a Narrow Forehead?
Wispy, side-swept, and curtain bangs suit a narrow forehead best, because they spread hair toward the temples and make the top of the face read wider. Each stays light enough to widen without weighing the forehead down. A blunt straight-across fringe does the opposite, drawing a heavy bar that makes a narrow forehead look narrower.
How Do You Add Width at the Jawline With Short Hair?
Short hair adds width at the jawline through where the perimeter sits and how the ends move. A bob that ends at the jaw or chin places fullness right at the narrow lower face. Ends that flip out, curl, or carry texture push that fullness sideways. Keeping the crown smooth stops the eye from drifting up.
Should a Diamond Face Avoid Volume at the Crown?
A diamond face with a bob or lob does best without crown volume. Height on top lengthens the face and draws attention away from the jaw, where a short cut should be adding width. Pixies are the exception, because they have no length at the jaw and use crown shape to balance the cheekbones instead.
What Short Cut Suits a Diamond Face With Straight Hair?
A sleek straight bob with a side part suits a diamond face with straight hair, along with a flipped-out bob and a jaw-length bob. Straight hair holds these clean shapes, and a slight bend or flip at the ends adds the width at the jaw. A side part keeps the forehead from looking narrow.
Conclusion
A diamond face asks short hair to widen the two narrow zones around its broad cheekbones, and women choosing a cut for this shape can lean on that same logic throughout. Bobs and lobs do that most directly by placing their perimeter at the jaw or chin, fringes widen the forehead, and shags soften the cheekbones with draping layers. Crown height on a bob, slicked finishes, edges at the cheekbone, and blunt fringes all work against it. Pixies suit a diamond face too, on their own terms, and the hair’s texture and density settle which of the 24 cuts fits best.
If you run a salon or supply hair to one, female clients with a diamond face who want a fuller jawline often need more density at the ends than fine hair provides. Our team can send samples and factory-direct pricing on texture-matched clip-in wefts and bulk hair. Because we manufacture 100% Vietnamese Human Hair in our own facility, you can match density and texture to each client rather than relying on whatever a middleman had in stock.
